We can be "at your office" in 6 mouse clicks! 
Click on the CAT!

Avaya

To Set Time on Avaya ACS phones:

1. Go to Station 10 or 11
2. Leave the phone on the hook!
3. Press the Feature Button and Dial 0 0 (Display should read "Program Extension")
4. Press the far left-hand Intercom button two (2) times (Display should read "System Program")
5. Dial "#103" (Display should read "System Time" + "Date and current time")
6. Enter “military time” (24-hour clock) For example, (9 a.m. =0900; 1 p.m. = 1300; 4 p.m. = 1600)
7. Press the Feature Button and Dial 0 0 (Display should read correct time and date.
8. This will exit programming and put your phone back into normal operation.)
9. Finished!

To Set Date on Avaya ACS phones:

1. Go to Station 10 or 11
2. Leave the phone on the hook!
3. Press the Feature Button
4. Dial 0 0 (Display should read "Program Extension")
5. Press far left-hand Intercom button two (2) times (Display should read "System Program")
6. Dial "#101" (Display should read "System Date" + "Data and current date")
7. Enter the date in the format of MM DD YY. (FOR EXAMPLE, 1/12/09 = "011209" and this would equal January 12, 2009).
8. Press the Feature Button
9. Dial 0 0 (Display should now read correct time and date. This will exit programming and put your phone back into normal operation.)
10. Finished!

top

---

Comdial

To Set Time on Comdial FXII digital phones:

1. Go to Station 10
2. Leave the phone on the hook!
3. Press the Intercom Button (Usually Blue in color)
4. Dial * # 0 *01
5. Enter the date in the format of YY MM DD. (FOR EXAMPLE, 1/12/09 = "090112" and this would equal January 12, 2009) THEN, AT THE same time, AND ON THE SAME LINE, ENTER “military time” (24-hour clock)for example, (9 a.m. =0900; 1 p.m. = 1300; 4 p.m. = 1600)
6. Press #
7. Press Speaker
8. Finished!

To Set Date and Time on Comdial DSU/DSUII digital phones:

1. Go to Station 10
2. Leave the phone on the hook!
3. Press the Intercom Button (Usually Blue in color)
4. Dial * # 0 1
5. Enter the date in the format of YY MM DD. (FOR EXAMPLE, 1/12/09 = "090112" and this would equal January 12, 2009) THEN, AT THE same time, AND ON THE SAME LINE, ENTER “military time” (24-hour clock)for example, (9 a.m. =0900; 1 p.m. = 1300; 4 p.m. = 1600)
6. Press #
7. Press Speaker
8. Finished!

To Turn Night Mode "On" and "Off" on Comdial digital phones:

1. Go to Station 10
2. Leave the phone on the hook!
3. Press the Intercom Button (Usually Blue in color)
4. Dial * # 0 3
5. Press "1" to put into Night Mode" or Press "0" to put into Day Mode.
6. Press Speaker
7. Finished!

To Set Speed Dial and / or Transfer Dial on Comdial digital phones - (This will transfer a call to Voice Mail, a Car Phone, or anywhere else!):

1. Leave the phone on the hook!
2. Press “Options” and “Next” to reach your choice - - ADIAL (For Buttons) or SDIAL (For Dial Pad Keys)
3. Select “Adial” or “Sdial”
4. At “Location” Prompt = Press Desired Button or Dial Pad Key
5. At “Line” Prompt = Select “0” (For any available line).
6. At “Number” Prompt = Press “Tap”, “Hold” and then dial the phone number as you would normally dial it, then press #.
7. Select “Save”
8. Press "Speaker"
9. Finished!

To Check and / or Set Baud Rate on Comdial digital phones:

1. Leave the phone on the hook!
2. Press "Intercom * # 746 * 15 1 (View Port & Baud) Press "Intercom * # 746 * 15 1 06 (Sets Baud to 2.4kb) Press Speaker Finished!

To Set Up Voice Mail & Other Buttons on Comdial digital phones:

1. Leave the phone on the hook!
2. Press "Intercom" then dial * * 1
3. Press the button you wish to program; then, for:
• Voice Mail: Press 6 + 1st V.M. ATI-D Port.
• Night: Press "Intercom" and dial * # 03.
• Page: Press "Intercom" and dial 87.
4. Press T/C
5. Press Speaker
6. Finished!

top

---

Mitel

To Set Time on Mitel digital PBX phones:

1. Go to Attendant Super Console 1000
2. Leave the phone on the hook!
3. Press the Function Button
4. Press the softkey under "ATT Function" (F 2 key)
5. Press the softkey under "Set Time" (F 2 key)
6. Display should say, "Enter Time (HH:MM)="
7. Enter “military time” (24-hour clock)for example, (9 a.m. =0900; 1 p.m. = 1300; 4 p.m. = 1600)
8. Press the softkey under "Set" (F 2 key)
9. Finished!

To Set Date on Mitel digital PBX phones:

1. Go to Attendant Super Console 1000
2. Leave the phone on the hook!
3. Press the Function Button
4. Press the softkey under "ATT Function" (F 2 key)
5. Press the softkey under "Set Date" (F 3 key)
6. Display should say, "Enter Date (DD/MM/YY)="
7. 5. Enter the date in the format of DD / MM / YY. (FOR EXAMPLE, 1/12/04 = "120104" and this would equal January 12, 2004)
8. Press the softkey under "Set" (F 2 key)
9. Finished!

top

---

Trillium

To Set Time on Trillium Panther P II telephones:

1. Go to Station 10
2. Leave the phone on the hook!
3. Press the "Program Button"
4. Dial 0 7
5. Enter “military time” (24-hour clock)(9 a.m. =0900; 1 p.m. = 1300; 4 p.m. = 1600)
6. Press "*" 7.
7. Finished!

To order, or for more information, call us...

top